Good afternoon. I just recently did my first Panelview Plus 1000 programming using Factory Talk View Studio ME. With a little bit of trial and a whole lot of error I eventually added a push button, numerical display, numerical input, and some text. This was all done locally at the machine. Now I have to add the same thing at the operators remote desktop. The computer already has HMI capability, so I’m not starting from scratch. The Remote Desktop has Factory Talk View Studio ME version 5.00.00 (CPR9) on it. My problem is when I go to Transfer Utility to upload the program I don’t know what ‘source’ to use. At the bottom of the screen where I ‘select source terminal’ I chose the computer at the top of the tree and it told me invalid source. I can see all the PLCs and PVs on the network, and I was able to upload the PV I just programmed. How do I find my source/destination so I can upload/download? Thanks for looking and appreciate any help.