Hi all,
I have learned a lot these past few days reading threads and looking at ladders. I have recently acquired a Omron Zen 20C1DR-D-V2
Running a (solenoid actuated) pneumatic device to lift a puck, shuttle the puck, hold the puck in position, then reset. Inputs and outputs are better explained here in PDF, also attached is ladder.
1. Can I simplify it? or better control?
2. How can I hold the Q3 3 seconds longer?
FYI Thanks to all of the support provided here, I started this project with no PLC background...well, I knew how to spell PLC
Thanks in advance!
Also I4 will be added later as well as another output...questions to come
I have learned a lot these past few days reading threads and looking at ladders. I have recently acquired a Omron Zen 20C1DR-D-V2
Running a (solenoid actuated) pneumatic device to lift a puck, shuttle the puck, hold the puck in position, then reset. Inputs and outputs are better explained here in PDF, also attached is ladder.
1. Can I simplify it? or better control?
2. How can I hold the Q3 3 seconds longer?
FYI Thanks to all of the support provided here, I started this project with no PLC background...well, I knew how to spell PLC
Thanks in advance!
Also I4 will be added later as well as another output...questions to come