SirTrollsalot
Member
Hello all,
I am having a hard time connecting to my ControlLogix PLC.
I recently visited a plant and needed to set my wired network connection (IPv4) to "Obtain an IP address automatically."
Now that I have returned to my office, I need to connect to this ControlLogix PLC. I set my IP address to a static address that exactly matches my PLC. If you look at my attachment, you will see that my 'test_bench' driver no longer recognizes a controller, but now recognizes a computer.
I am out of ideas, and I followed my regular procedure in order to connect to the controller.
Any help will be appreciated. I am new to this stuff so anything helps.
I am having a hard time connecting to my ControlLogix PLC.
I recently visited a plant and needed to set my wired network connection (IPv4) to "Obtain an IP address automatically."
Now that I have returned to my office, I need to connect to this ControlLogix PLC. I set my IP address to a static address that exactly matches my PLC. If you look at my attachment, you will see that my 'test_bench' driver no longer recognizes a controller, but now recognizes a computer.
I am out of ideas, and I followed my regular procedure in order to connect to the controller.
Any help will be appreciated. I am new to this stuff so anything helps.