shady_yehia
Member
Hi there.. I'm building a SCADA application with an old Siemens S5 928-135U plc.. i'm using an OPC Server from SoftwareToolBox..
The proplem is that all addresses of the analoge channels of the plc are in the Peripheral I/O area (e.g. TPW128,TPW130) and so on. But the OPC Server doesn't support these addresses. can any body tell me what to do?
Thanks in advance..
The proplem is that all addresses of the analoge channels of the plc are in the Peripheral I/O area (e.g. TPW128,TPW130) and so on. But the OPC Server doesn't support these addresses. can any body tell me what to do?
Thanks in advance..