![]() ![]() ![]() ![]() ![]() ![]() |
||
![]() |
||
![]() ![]() ![]() ![]() This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc. |
||
![]()
|
New Here? Please read this important info!!!
![]() |
#1 |
Member
|
ftv studio can't upload or download?
Hi guys
I have a quick question , I have an issue where when I go to transfer to a pvp 1250 I can’t download or upload ? I can test the screen on line but when I try and transfer it doesn’t transfer? And times out? Any ideas, this has worked in the past , it is version 8 ftv studio Thanks Stu |
![]() |
![]() |
#2 |
Lifetime Supporting Member + Moderator
|
Any chance you somehow deleted all the drivers on the terminal, including the RSLinx Enterprise Ethernet driver ?
My understanding is that RSLinx Enterprise is actually the comms link between the development PC and the PV+ terminal. It's not FTP or some other file transfer protocol. The fix in such a case is to use the onscreen menus to reset the drivers to defaults. |
![]() |
![]() |
#3 |
Member
|
I set up coms shortcut again in enterprise and had the test play made works with data,etc
But still no download? Thanks stu |
![]() |
![]() |
#4 |
Lifetime Supporting Member + Moderator
|
Does FTView ME give you an Error Number and Text Error when the Upload/Download fails?
Stu....
__________________
There's never time to do it right, but there is always time to do it over! No trees were killed in the creation of this message. However, many electrons were terribly inconvenienced. ![]() |
![]() |
![]() |
#5 |
Member
|
It did have an error but I can’t remember,I will check again tomorrow , thanks Stu
|
![]() |
![]() |
#6 |
Member
|
I have found the issue guys IP address had a number missing on the enterprise short cut
My fault fat fingers Thanks for your help |
![]() |
![]() |
Bookmarks |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Upload / Download recipe in FTV ME 8.0 on startup | neos | LIVE PLC Questions And Answers | 1 | June 14th, 2017 10:36 PM |
FTV SE v9 download, Am I missing something? | Mr.Adam | LIVE PLC Questions And Answers | 2 | March 13th, 2017 03:17 PM |
RSlogix 5000, Cant Upload Or Download. | dhuber | LIVE PLC Questions And Answers | 1 | January 9th, 2014 01:40 PM |
Step7 upload hardware then download question | HJTRBO | LIVE PLC Questions And Answers | 3 | July 27th, 2012 07:09 AM |
Siemens Starter upload download | Kataeb | LIVE PLC Questions And Answers | 10 | October 8th, 2008 01:14 AM |