You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Reply
Thread Tools Display Modes
Unread December 15th, 2019, 10:05 AM   #1
ceilingwalker
Lifetime Supporting Member
United States

ceilingwalker is offline
 
ceilingwalker's Avatar
 
Join Date: Mar 2010
Location: Phoenix, AZ
Posts: 1,198
Omron Programmable Terminal

Hello all. I have an Omron programmable terminal NTH25-ST121B. I found an operator manual however, it makes no mention of programming this thing. For instance, what software to use. Anyone have any experience programming these that could shed a little light on this for me? Thanks
  Reply With Quote
Unread December 15th, 2019, 10:56 AM   #2
tarik1978
Member
Morocco

tarik1978 is offline
 
Join Date: Mar 2010
Location: casablanca
Posts: 561
Did you check this document
https://www.edata.omron.com.au/eData...V054-E1-1A.pdf
__________________
“A bird sitting on a tree is never afraid of the branch breaking, because her trust is not on the branch but on it’s own wings. Always believe in yourself”
  Reply With Quote
Unread December 15th, 2019, 11:55 AM   #3
ceilingwalker
Lifetime Supporting Member
United States

ceilingwalker is offline
 
ceilingwalker's Avatar
 
Join Date: Mar 2010
Location: Phoenix, AZ
Posts: 1,198
Quote:
Originally Posted by tarik1978 View Post
Yup, I have that. I couldn't find anything useful in it, regarding programming. Doesn't mean I couldn't have missed it though.
  Reply With Quote
Unread December 16th, 2019, 03:59 AM   #4
parky
Member
United Kingdom

parky is offline
 
parky's Avatar
 
Join Date: Oct 2004
Location: Midlands
Posts: 1,542
I believe this may be the software NT-ZJCAT1-EV3 I used to have what was called NT series support tool and I believe this could program the NTH range
I do know the in-built help is useless though.
  Reply With Quote
Unread December 16th, 2019, 07:23 AM   #5
gtsuport
Member
United States

gtsuport is offline
 
Join Date: Feb 2005
Location: Grand Rapids, MI
Posts: 1,187
NT Support Tool is in the Utility directory on the CX-One CD/DVD.


Link to the manual.



https://www.fa.omron.com.cn/data_pdf...-zjcmx1-v4.pdf


gtsuport
  Reply With Quote
Unread January 5th, 2020, 11:19 AM   #6
ceilingwalker
Lifetime Supporting Member
United States

ceilingwalker is offline
 
ceilingwalker's Avatar
 
Join Date: Mar 2010
Location: Phoenix, AZ
Posts: 1,198
Quote:
Originally Posted by gtsuport View Post
NT Support Tool is in the Utility directory on the CX-One CD/DVD.


Link to the manual.



https://www.fa.omron.com.cn/data_pdf...-zjcmx1-v4.pdf


gtsuport
Thank you for the link. I have perused the manual however, I don't see the NTH25 listed anywhere. I have an operator manual as well, that does include the NTH25. An Omron tech sent me the link to download the NT support tool. I am still unable to upload from the NTH25 to my laptop. I have (what I believe to be) the correct cable to connect, I have set the NTH25 so it is displaying "Please Transmit" but connection keeps timing-out. Any thoughts? Thank you
  Reply With Quote
Unread January 5th, 2020, 11:30 AM   #7
ceilingwalker
Lifetime Supporting Member
United States

ceilingwalker is offline
 
ceilingwalker's Avatar
 
Join Date: Mar 2010
Location: Phoenix, AZ
Posts: 1,198
I am currently pressing buttons on the HMI and watching the ladder logic which really is proving to be the needle in the hay stack. Bluebyu graciously donated 3+ hours on the phone with me to get me up to speed with this software and I am getting close. I have also chased wire in the cabinet to identify some of the I/O so the only missing piece is this HMI. It seems like it should be easier for me to do. Ashamedly, I tend to make things a little more difficult than they really are.
  Reply With Quote
Unread January 6th, 2020, 07:16 AM   #8
gtsuport
Member
United States

gtsuport is offline
 
Join Date: Feb 2005
Location: Grand Rapids, MI
Posts: 1,187
What cable are you using to connect the computer to the HMI?
  Reply With Quote
Unread January 6th, 2020, 08:34 AM   #9
ceilingwalker
Lifetime Supporting Member
United States

ceilingwalker is offline
 
ceilingwalker's Avatar
 
Join Date: Mar 2010
Location: Phoenix, AZ
Posts: 1,198
Quote:
Originally Posted by gtsuport View Post
What cable are you using to connect the computer to the HMI?
I have one that is USB-CN220-EU, one that is XM2S-09 and then I have another that is just 2 DB-9's with breakout boards.
  Reply With Quote
Unread January 6th, 2020, 08:41 AM   #10
gtsuport
Member
United States

gtsuport is offline
 
Join Date: Feb 2005
Location: Grand Rapids, MI
Posts: 1,187
The USB-CN220-EU should be the correct cable.
XM2S-09 is just the Omron DB9 hood.
See attached for pinout information.
Attached Files
File Type: pdf GTC99CC.pdf (8.5 KB, 4 views)
  Reply With Quote
Unread January 6th, 2020, 08:50 AM   #11
ceilingwalker
Lifetime Supporting Member
United States

ceilingwalker is offline
 
ceilingwalker's Avatar
 
Join Date: Mar 2010
Location: Phoenix, AZ
Posts: 1,198
Quote:
Originally Posted by gtsuport View Post
The USB-CN220-EU should be the correct cable.
XM2S-09 is just the Omron DB9 hood.
See attached for pinout information.
And I connect the NT directly to my laptop, correct, not going through the CPU? The tech I talked to at Omron said he thinks I am supposed to connect to the CPU.
  Reply With Quote
Unread January 6th, 2020, 08:51 AM   #12
gtsuport
Member
United States

gtsuport is offline
 
Join Date: Feb 2005
Location: Grand Rapids, MI
Posts: 1,187
You should be able to connect directly from your computer.
I am not seeing it in the datasheet, is there a USB connector on the NTH 25?
  Reply With Quote
Unread January 6th, 2020, 09:00 AM   #13
ceilingwalker
Lifetime Supporting Member
United States

ceilingwalker is offline
 
ceilingwalker's Avatar
 
Join Date: Mar 2010
Location: Phoenix, AZ
Posts: 1,198
Quote:
Originally Posted by gtsuport View Post
You should be able to connect directly from your computer.
I am not seeing it in the datasheet, is there a USB connector on the NTH 25?
No
  Reply With Quote
Unread January 6th, 2020, 11:02 AM   #14
ceilingwalker
Lifetime Supporting Member
United States

ceilingwalker is offline
 
ceilingwalker's Avatar
 
Join Date: Mar 2010
Location: Phoenix, AZ
Posts: 1,198
Quote:
Originally Posted by gtsuport View Post
What cable are you using to connect the computer to the HMI?
Have you had any luck connecting a keyspan and then build the cable with the DB9's? I am getting crushed between this rock and the hard place. Omron is telling me it must be the CS1W-CIF31 and I am happy to buy one but would like to know if this would work, in the name of saving time? Thanks
  Reply With Quote
Unread January 6th, 2020, 11:06 AM   #15
gtsuport
Member
United States

gtsuport is offline
 
Join Date: Feb 2005
Location: Grand Rapids, MI
Posts: 1,187
I have used the Keyspan HS19 with the cable.
I have not connected to a NTH25, but I have connected to other NT models.


Did you get the USB-CN220-EU from genius in training?
Usually his cables just work.


gtsuport
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
Siemens or Omron? Gromit LIVE PLC Questions And Answers 35 November 14th, 2017 10:44 AM
Omron NT11S software Glanford LIVE PLC Questions And Answers 3 March 31st, 2014 05:13 PM
Omron NS10 Ethenert Coms to S7-300 PLC ricoghardforth LIVE PLC Questions And Answers 1 February 19th, 2014 02:27 PM
Mitsubishi programmable terminal and Shihlin PLC rfid LIVE PLC Questions And Answers 6 October 8th, 2007 08:18 PM
Omron - some beginner questions Dan_B LIVE PLC Questions And Answers 14 September 22nd, 2006 02:28 PM


All times are GMT -5. The time now is 04:47 AM.


.