drbitboy
Lifetime Supporting Member
yeah, insomniaDR: You beat me to it,
...
Also, I have put in the comment that it is possible to use the actual and add the + 3.0 degrees rather than just increment the Var Setpoint, this way if it does not reach the original set point before the timer up bit then it only adds +3 so in effect it will only ensure it is trying to reach 3 degrees above actual rather than keep incrementing the set point.
From what you posted, I think that limit check happens only once, at the rising edge of Start_Bit (when My_Pulse is 1), not throughout the setpoint progression.