racso
Member
I don't have very much experience with remote I/O. Thought I'd throw that on the table right away.
This is an existing system that my customer requires an addition to:
My question:
As I have as posted above I have a SLC 5/04. The 1747-SN is configured as follows: 1/2 to robot 1, 1/2 to robot 2, 1/4 rack logical rack 1, 1/4 rack logical rack 2, 1/4 rack logical rack 3.
How much spare do I have left?
Does anyone know a good link for a configuring Remote I/O addresing? eg. number of racks (restrictions), 1 slot/2 slot addressing etc.
Thanks in advance.
RaCsO
This is an existing system that my customer requires an addition to:
My question:
As I have as posted above I have a SLC 5/04. The 1747-SN is configured as follows: 1/2 to robot 1, 1/2 to robot 2, 1/4 rack logical rack 1, 1/4 rack logical rack 2, 1/4 rack logical rack 3.
How much spare do I have left?
Does anyone know a good link for a configuring Remote I/O addresing? eg. number of racks (restrictions), 1 slot/2 slot addressing etc.
Thanks in advance.
RaCsO