OkiePC
Lifetime Supporting Member
Maybe a screen shot will help...one which shows the tag too, like mine...
daba: WHAAAAAATTTTT?!?! So I changed the expression to Part_Number as you suggested in your example and my errors went away!!! This is what I found to be confusing, previously I did not have anything after the [Control.POS] and that gave me errors. Then I added the Part_Recipe after that and then I got other errors. Now that I have changed it as you suggested....POOF, no more errors!!!! SO thanks to everyone who has patiently assisted me with this problem, its good to also know that I wasn't too far off on my original expression. I just wasn't quite there and needed that extra nudge(probably with a locomotive at full speed) to connect all the dots!!! Now that the FSC no longer has any errors, I should be ok with configuring the rest of the logic for this project!!!! Great advice, and another issue resolved!!! Thanks again!!!
DonBlack: That is exactly what I am working on right now, and I also will be including a part not found condition to be displayed on the HMI as well.
DonBlack: You and I are thinking on the same page today sir, that is just what I finished doing!!!
daba: I'm using the INT for moving a value into a counter preset, the SINT is a data type that is for an external device that requires this data type. My part numbers are all alphanumeric so I do need the STRING type for those. Thanks!
DonBlack: You and I are thinking on the same page today sir, that is just what I finished doing!!!
daba: I'm using the INT for moving a value into a counter preset, the SINT is a data type that is for an external device that requires this data type. My part numbers are all alphanumeric so I do need the STRING type for those. Thanks!