robw53
Member
OP
The fiber is a ring and that I understand will be blocked but on some of the 5700 it says that for all ports but there is no ring it's star from 5700 to PLC, HMI VFD's etc
PF40 Communication Error
- Thread starter robw53
- Start date
Similar Topics
I have a client with 7 lines of conveyors which each have up to 30 Powerflex 40 drives on DeviceNet. I have vpn access to the site and am trying...
One of my customers has an overwrapping machine with a PowerFlex 40 controlling the infeed conveyor motor. They want to decrease the decel setting...
i have got setup in the shop a 1400 with a 1763-nc01 adpator to allow me to talk MODBUS to the drive. so far i have setup both the drive and 1400...
i have a ML1400 connected to a PV+700 and im looking into adding some PF40's with individual 22-comm-E cards, one of them i will be starting it...
i have a 22-comm-e card which has gone down this was setup as a generic module with 4 other PF4 daisey chained ive swapped a deceased 22-comm-E...
