SLC 5/02 not talking

Hi, I have 6 SLC 5/02s on 485 network.

One of the processors faulted. I've replaced it and downloaded the program into the replacement using the UIC box. All looks fine, I can put it into remote run but when I disconnect and plug it back into 485 it's not communicating. I can't see it on the scada. Any ideas.

JohnnyJones said:

Any ideas.

Click to expand...

Check the node address, sounds like you have the wrong address that your downloading to the 5/02

geniusintraining said:

Check the node address, sounds like you have the wrong address that your downloading to the 5/02

Click to expand...

Yeah you're right. I worked it out myself but if I'd checked back here I'd have sorted it an hour earlier!

JohnnyJones said:

you're right

Click to expand...

well as they say here in the south.... "even a blind squirrel finds a nut every once in awhile"