Hello All,
Would anyone know a simple/Quick method of creating "Tags" in Siemens Simatic ProTool/Lite. I seem to be only able to create Tags by selecting each, one at a time. This is quite a labour intensive exersise as I cannot select the structures only the elements. Obviously this is to ensure that I can place Limit values on each Tag. However I have a couple of hundred to do and its a tiny bit cumbersome.
The method I use at present:
>RightClick - Tag insert
Open tree to Structure
>Click element
>Apply
>ok
-Limit Values.
Any ideas?? can I import Symbols automatically?
Cheers,
Mylo
Would anyone know a simple/Quick method of creating "Tags" in Siemens Simatic ProTool/Lite. I seem to be only able to create Tags by selecting each, one at a time. This is quite a labour intensive exersise as I cannot select the structures only the elements. Obviously this is to ensure that I can place Limit values on each Tag. However I have a couple of hundred to do and its a tiny bit cumbersome.
The method I use at present:
>RightClick - Tag insert
Open tree to Structure
>Click element
>Apply
>ok
-Limit Values.
Any ideas?? can I import Symbols automatically?
Cheers,
Mylo