Dear All,
I am struck with a compatibility issue of Panel view Plus 600 with Compactlogix PLC system.I have created an Application in Factory Talk Me and linked with Compact logic system, tested the Application creating runtime Application in my Laptop every thing is fine i am able to communicate the tags of compactlogix and get the data but the same Application i have downloaded into the Panel View Plus 600(fm 5.00.01.55) , the data from the compactlogix is not getting.Compactlogix system is having the AENT Module with Flex I/O modules and communication between compactlogix system with Panel View is Ethernet
I have tested the Panel View Plus 600 with Flex Logix system with some dummy application and found ok.Panel view is communicating with Flex Logix system without any issue.So with this tests its looking some compatibility issue with Compact logix system and panel view plus 600.The details of this configuration are
as follows
1)Compactlogix(1769-L23EQB1B)-software version V 17.2
2)Factory Talk Me
Release number: 5.00.00(CPR 9)
Patch/Pack number : 00
Build number : 55
3)Panel View Plus 600(2711P-T6C20A)
firmware :5.00.01.55(CPR 9)
4)AENT(1794-AENT/P)
So please suggest me for the solution for this compatibility issue.
I am struck with a compatibility issue of Panel view Plus 600 with Compactlogix PLC system.I have created an Application in Factory Talk Me and linked with Compact logic system, tested the Application creating runtime Application in my Laptop every thing is fine i am able to communicate the tags of compactlogix and get the data but the same Application i have downloaded into the Panel View Plus 600(fm 5.00.01.55) , the data from the compactlogix is not getting.Compactlogix system is having the AENT Module with Flex I/O modules and communication between compactlogix system with Panel View is Ethernet
I have tested the Panel View Plus 600 with Flex Logix system with some dummy application and found ok.Panel view is communicating with Flex Logix system without any issue.So with this tests its looking some compatibility issue with Compact logix system and panel view plus 600.The details of this configuration are
as follows
1)Compactlogix(1769-L23EQB1B)-software version V 17.2
2)Factory Talk Me
Release number: 5.00.00(CPR 9)
Patch/Pack number : 00
Build number : 55
3)Panel View Plus 600(2711P-T6C20A)
firmware :5.00.01.55(CPR 9)
4)AENT(1794-AENT/P)
So please suggest me for the solution for this compatibility issue.