Panelview plus processor temperature

stallone

Member
S
Join Date
Oct 2010
Location
south africa
Posts
172
Good day

i am trying to see the processor temperature of the terminal.

I have 2 x 2711P-T10C4D9 , and 2711PC-T10C4D8

in the about terminal on the panelview,
it shows me the page with battery voltage and processor temp but the temp is 0.00 degres.
But if i look on the winCE desktop checker, it shows me the correct temp around 33degres.

any idea on why its not displaying on the terminal?

thank you
 

Similar Topics

B
Panelview Plus to SLC 5/04 processor Alarm Setup
What is the proper way to setup an alarm tag so that a SLC 500 controller with a 5/04 processor can be read in a Panelview Plus Terminal. I've...
Replies
0
Views
1,942
[email protected]
B
P
Two Panelview Plus sharing one Control Logix processor
Is it possible to have two or several PanelView Plus communicating with one Control Logix processor on Ethernet network? This is a new project...
Replies
2
Views
3,284
The Plc Kid
The Plc Kid
L
Panelview Plus 1000 Can't communicate with processor
Hello everyone, i'm doing a new installation and my panelview plus 1000 does not want to communicate with my compactlogix controller. Below is a...
Replies
1
Views
1,941
val_99
V
S
Panelview Plus 7 Std Series D - Screen Navigation Issues
I'm at a loss here and hoping someone else has seen this: Background: We've got two identical machines on our floor (we'll call them machine A &...
Replies
0
Views
70
Super Steve
S
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
129
jscampbell210
J
Back
Top Bottom