My project is migration hardware also logic of GML to new controllogix. as information, this GML connected to ULTRA 3000 servo driver and have 2 axis motion. The goal, controllogix will be direct connected to ULTRA 3000 via motion module M02AE. This my first experiences with GML hardware. My question:
1. can we convert logic of GML to RSLogix5000 directly (like RSLgx5 to RSLgx5000), if we have to use another softwere, what softwere used.
2. this GML have Digital input,Digital Output, and analog from encoder and ultra 3000. How we have to mapping address of this I/O to 1756-IB16 and 1756-OB16.
3. may the audiences have the GML software, can you share that software to us? and how we can get it.
thanks your attention..
best regards,
1. can we convert logic of GML to RSLogix5000 directly (like RSLgx5 to RSLgx5000), if we have to use another softwere, what softwere used.
2. this GML have Digital input,Digital Output, and analog from encoder and ultra 3000. How we have to mapping address of this I/O to 1756-IB16 and 1756-OB16.
3. may the audiences have the GML software, can you share that software to us? and how we can get it.
thanks your attention..
best regards,