Hello,
I am doing the OPC communication of ET200SP using Keserverex v4. If I use the PLCSIM with TIA portal v15.1 and S7-300 (as no option of ET200SP) as the device in Kepserver, it works well.
When I use the same configuration with actual hardware then Kepserver gives error that "Device is not responding". What should I do?
Thank you
I am doing the OPC communication of ET200SP using Keserverex v4. If I use the PLCSIM with TIA portal v15.1 and S7-300 (as no option of ET200SP) as the device in Kepserver, it works well.
When I use the same configuration with actual hardware then Kepserver gives error that "Device is not responding". What should I do?
Thank you