hill831017
Member
Hello, Does anybody notice or meet the same problem - diagnostic status bit in DB200(auto create by FB126) has delay for around 10s after profinet salve failed to reach.
CPU 319F-3 PN/DP, only PN100 existing, XF208,Pilze Safety, Lenze FU, Murr IO are connected.
Half of my editing....Feedback is, it was working after call FB126 in OB1,82,83,86,100.....
FYI
CPU 319F-3 PN/DP, only PN100 existing, XF208,Pilze Safety, Lenze FU, Murr IO are connected.
Half of my editing....Feedback is, it was working after call FB126 in OB1,82,83,86,100.....
FYI