I have an Allen Bradely chassis 1747-A7. In it is a CPU 5/02 processor. It has recently started giving 'CPU FAULT' red flashing sign. The software that is in the computer which is supposed to communicate to it via PLC is WINTELLIGENT LINX.
If I take this CPU to another chasis which is working fine it works there OK but moving it back it again starts giving fault sign. Trouble shooting section of AB recommends to monitor 'Status File Word S:6' for major codes. But I have no idea where is it located. I will appreciate greatly any help that you can offer.
Sincerely
Syed
If I take this CPU to another chasis which is working fine it works there OK but moving it back it again starts giving fault sign. Trouble shooting section of AB recommends to monitor 'Status File Word S:6' for major codes. But I have no idea where is it located. I will appreciate greatly any help that you can offer.
Sincerely
Syed