omron plc ATM instruction
- Thread starter joe2005
- Start date
gtsuport
Member
What is the model number of the processor?
seppoalanen
Member
Not found from CX-programmer ?
Jay Anthony
Member
This instruction is found in the SP16/20 and SK16/20 Mini-PLCs. It refers to a special on-board timer that receives its setpoint from an analog potentiometer found under the door where the programming console plugs in. Just use a regular timer and give it a fixed setpoint.
Similar Topics
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Hi There,
I have couple of Omron PLCs connected on my kepserverex and my intouch reads data from kepserverex. I have been observing that roughly...
I am working on a project using a NB screen and NX1P2 PLC.
I am having a really hard time getting a real number to properly translate through to...
Our plant manger/my boss wants each line to display the takt time above the line. I am trying to research the cheapest way to do this. Our plant...
I have PLC Omron CJ2M with OD211 module. I want to use the pulse output and PWM output and this module. But i confuse how to activated this, i...