mbd0722
Member
Shifting I/O Modules, Slots: RSLogix 500 Question
I am using RSLogix 500 and have an SCL 5/03 configuration 75% finished. I did not realize that I had additional inputs to configure.
The current I/O configuration is:
slots 1 to 4 = 1746-IA16 input modules
slots 5 to 7 = 1746-OAP12 output modules
The desired I/O configuration is:
slots 1 to 5 = 1746-IA16 input modules
slots 6 to 8 = 1746-OAP12 output modules
I would like to reconfigure the chassis and move the output modules to slots 6 to 8. Then I would like to add another input card so that the input slots will be slots 1 to 5. Is there a safe and easy method that this can be accomplished within RSLogix 500? Do I have to re-assign new addresses, descriptions, and symbols to each contact for the shifted output modules or can this be done automatically within RSLogix 500? Thank You
I am using RSLogix 500 and have an SCL 5/03 configuration 75% finished. I did not realize that I had additional inputs to configure.
The current I/O configuration is:
slots 1 to 4 = 1746-IA16 input modules
slots 5 to 7 = 1746-OAP12 output modules
The desired I/O configuration is:
slots 1 to 5 = 1746-IA16 input modules
slots 6 to 8 = 1746-OAP12 output modules
I would like to reconfigure the chassis and move the output modules to slots 6 to 8. Then I would like to add another input card so that the input slots will be slots 1 to 5. Is there a safe and easy method that this can be accomplished within RSLogix 500? Do I have to re-assign new addresses, descriptions, and symbols to each contact for the shifted output modules or can this be done automatically within RSLogix 500? Thank You