Hey everybody,
Right now at school I'm working on a trainer with a 1394 GMC Turbo 2 Axis Drive System, connected to a SLC 5/04. The 1394 is connected to the backplane of the SLC. I also have a Panelview 1000 connected via DH+ to the SLC. The Panelview is working like it should with the SLC, but I can't get what I do on the oanelview to control anything on the GMC. I have already programmed a sequence in GMC Commander that I want to happen, and I have tested it with discrete inputs to a FlexI/O connected to the GMC. All I want the Panelvie and SLC to control right now is enable the servo drive to run, and completely stop the servo drive, keeping the feedback for both axis on. I need help really with how to address things in the SLC to address to the GMC, and also how to program in GMC Commander to add this feature. From what I tried, when I have what I thougt was teh correct addressing in the SLC, nothing on the GMC worked. When I removed the inputs from the SLC from the GMC program, it works fine. Can anyone give me any ideas.
BTW, the GMC is in the SLC on slot 7.
Right now at school I'm working on a trainer with a 1394 GMC Turbo 2 Axis Drive System, connected to a SLC 5/04. The 1394 is connected to the backplane of the SLC. I also have a Panelview 1000 connected via DH+ to the SLC. The Panelview is working like it should with the SLC, but I can't get what I do on the oanelview to control anything on the GMC. I have already programmed a sequence in GMC Commander that I want to happen, and I have tested it with discrete inputs to a FlexI/O connected to the GMC. All I want the Panelvie and SLC to control right now is enable the servo drive to run, and completely stop the servo drive, keeping the feedback for both axis on. I need help really with how to address things in the SLC to address to the GMC, and also how to program in GMC Commander to add this feature. From what I tried, when I have what I thougt was teh correct addressing in the SLC, nothing on the GMC worked. When I removed the inputs from the SLC from the GMC program, it works fine. Can anyone give me any ideas.
BTW, the GMC is in the SLC on slot 7.