I have application with Controllogix connected to PowerflexDC drive through 20-COMM-E (ethernet connection).
I want to configure the drive as combination between speed and torque (P241=3). I will send the speed reference and torque reference using DPI Port 5.
How to select the speed source and torque soruce in same time?
DPI P5 select on P1327 is only one choice (speed or torque)?
How to write P39?
My experience using Powerflex 700S or PF 700 VC is more easier, we can send the speed source and torque source in the same time.
I need some knowledge base or information from anyone who experience with this application.
Thanks/
Osias
I want to configure the drive as combination between speed and torque (P241=3). I will send the speed reference and torque reference using DPI Port 5.
How to select the speed source and torque soruce in same time?
DPI P5 select on P1327 is only one choice (speed or torque)?
How to write P39?
My experience using Powerflex 700S or PF 700 VC is more easier, we can send the speed source and torque source in the same time.
I need some knowledge base or information from anyone who experience with this application.
Thanks/
Osias