anthr_plcnewbie
Member
I have a production line where we have several scales on Controlnet back to a L55 Controllogix. All of them were JagXtremems. One of them went bad and we replaced it with a IND570. I can find pretty good documentation for IND570 and setup and ran the scale on ControlNet to a test processor on the test bench.
I am having trouble with the JagExtreme. When I go online to the controller on the production line and browse over Controlnet using RSNetworx, it just gives a bunch of 'question marks' for Jags because I do not have EDS file and I just can't find them anywhere on the internet.
Would there be issues if I scheduled the controlnet network with no EDS file for the Jags and added the new IND570 node for which I did download and install EDS file? I don't want to screw up the current system.
I am having trouble with the JagExtreme. When I go online to the controller on the production line and browse over Controlnet using RSNetworx, it just gives a bunch of 'question marks' for Jags because I do not have EDS file and I just can't find them anywhere on the internet.
Would there be issues if I scheduled the controlnet network with no EDS file for the Jags and added the new IND570 node for which I did download and install EDS file? I don't want to screw up the current system.