ControlLogix and a JAGXtreme over Ethernet/IP

[JBooks82]

My PLC is an AB ControlLogix L62. I am communicating to a Mettler Toledo JagXtreme over Ethernet/IP. There is not an add-on profile in RSLogix 5000 for this device. I have the two communicating and am actively recieving the weights in the PLC. My problem is that I am trying to figure out what bit to set to zero the scale from the PLC. Any assistance would be appreciated.

 

[jkerekes]

Did you try the Mettler Toledo website for documentation?

 

[mclevenger]

jbooks,

Did you have to use the controlnet card for the jagxtreme or the built in ethernet port?