This is the dilemma, ControlLogix to Edwards text messaging board via EtherNet.
At first it may sound simple enough to say send it through the serial port with an ASCII write command and convert the signal, but the serial port is being utilized talking to a PC running LABVIEW.
The Edwards will accept ASCII or HEX commands, has anybody had experience messaging a DINT with hex throughput?
At first it may sound simple enough to say send it through the serial port with an ASCII write command and convert the signal, but the serial port is being utilized talking to a PC running LABVIEW.
The Edwards will accept ASCII or HEX commands, has anybody had experience messaging a DINT with hex throughput?