hi guys,
really need your help again.. i find it difficult not familiar with Omron software while my project schedule is so tight!
I would like to know how to use the FIFO function in Omron. my example logic as below:
When part loaded, sensor determined the first pitch is occupied. Then indexer motor go 2 pitches to pitch 3. At pitch 3 station start work.. After that part go another 2 pitches to unload station.
When no part loaded, station will not work when the pitch arrived. When there are no parts at all, the index conveyor will not run.
I wish to compare Data memory pitch 3 to determine whether station should work.
And if data memories are all zero my motor will not run.
I’m not familiar with Omron CX so I wonder how to work out this function. Can anyone help me, thank you.
really need your help again.. i find it difficult not familiar with Omron software while my project schedule is so tight!
I would like to know how to use the FIFO function in Omron. my example logic as below:
When part loaded, sensor determined the first pitch is occupied. Then indexer motor go 2 pitches to pitch 3. At pitch 3 station start work.. After that part go another 2 pitches to unload station.
When no part loaded, station will not work when the pitch arrived. When there are no parts at all, the index conveyor will not run.
I wish to compare Data memory pitch 3 to determine whether station should work.
And if data memories are all zero my motor will not run.
I’m not familiar with Omron CX so I wonder how to work out this function. Can anyone help me, thank you.