How to create FIFO style function in Omron CP2E (Ladder)

Here is a modified version of Machine 1 remove from list, so even if machine 1 is not first in the queue it is deleted out of which ever location it is in.
Note: you do not need the oneshot pulse low as by using the NOT of the sensor and it is in at least one of the queue words it resets the bin in q bit so acts as a oneshot anyway this does the same thing, you would need to do this on the other machines logic for deleting the machine number.

Modded Machine 1.png
 

Similar Topics

Hello, I've been trying to learn this a while now and still have not found out how this works. I have an Omron CJ2M PLC and an ABB ACS 355 VFD...
Replies
1
Views
246
Hello, I have to deal with iFix again and am looking at the most efficient way to create alarms to display in iFix, i.e. not creating an...
Replies
0
Views
156
Good morning to all, I have the following issue, I installed everything of intouch including the patch, it is the 2023 version. The...
Replies
0
Views
333
So, I finally got versioin 27 installed on my Windows 10 VM. However, now I can't upload a project from my lab controller. I have the above error...
Replies
0
Views
1,130
Hi all, I have few GB of logged data created by RS View 32 Works, it is all in .DBF format. At the moment, my company wants to shift all data to...
Replies
14
Views
1,459
Back
Top Bottom