OffByOneEra
Member
We’re looking to setup a stand-alone training station with FT View and a connection to a simulated plant system which would match the RSLOGIX 5000 setup physically installed in the field. It’s looking like running our existing PLC project in Emulate 5000 and tweaking some of the ways that data comes in would be the easiest way to setup something like this.
My biggest question is whether Emulate 5000 is something that could be setup on a computer with the full RSLOGIX STUDIO 5000 setup and then deployed by itself in a standalone fashion on a workstation or if we need another full install of RSLOGIX Studio 5000 on the training workstation to get it all up and running?
This must be a fairly common situation so I’d be interested in hearing if there are any better ways to get a simulated/training environment setup to match an existing FT HMI install.
My biggest question is whether Emulate 5000 is something that could be setup on a computer with the full RSLOGIX STUDIO 5000 setup and then deployed by itself in a standalone fashion on a workstation or if we need another full install of RSLOGIX Studio 5000 on the training workstation to get it all up and running?
This must be a fairly common situation so I’d be interested in hearing if there are any better ways to get a simulated/training environment setup to match an existing FT HMI install.