Tim Ganz
Member
We had a fire in a control panel that had a micrologix 1200 and management wants us to put a SLC system in because we have a pallet of them from machines we got rid of.
Tried to convert program but got many errors so we are doing a lot of it in manual mode.
We were using the CPW instruction in the micrologix but it's not in the SLC so what can we use.
Also we were using the RCP instruction also what could we use in it's place.
Tried to convert program but got many errors so we are doing a lot of it in manual mode.
We were using the CPW instruction in the micrologix but it's not in the SLC so what can we use.
Also we were using the RCP instruction also what could we use in it's place.