EthernetIP Communication between SLC5/05 and M580 - PLCS.net

eldod16 · October 2nd, 2022, 01:51 PM

Hi, I'm trying to accomplish communication between an SLC5/05 PLC and a M580 P582040 using a NOC0301 card. I was wondering if any of you have done this, or have any resosurces on the matter. I have found so documentation on how to do this with a controllogix PLC, but not a SLC5/05.

Thank you

byteforlunch · October 7th, 2022, 08:41 AM

If the NOC0301 support UCMM communication, you can send read/write commands to it using service 0x4b, class 0x67, inst 0x01 which is the PCCC object. The data format is basically DF1 so the functions are A2 (read) and AA (write)

Check out this useful link
http://www.iatips.com/pccc_tips.html#pccc

October 2nd, 2022, 01:51 PM	#1
eldod16 Member Join Date: Oct 2022 Location: montreal Posts: 1	EthernetIP Communication between SLC5/05 and M580 Hi, I'm trying to accomplish communication between an SLC5/05 PLC and a M580 P582040 using a NOC0301 card. I was wondering if any of you have done this, or have any resosurces on the matter. I have found so documentation on how to do this with a controllogix PLC, but not a SLC5/05. Thank you

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Topics
Thread	Thread Starter	Forum	Replies	Last Post
communication between AB micrologix 1400 and modicon m580	ADHITYAN	LIVE PLC Questions And Answers	6	March 19th, 2020 04:34 PM
communication between AB micrologix 1400 and modicon m580 through modbus rtu	ADHITYAN	LIVE PLC Questions And Answers	0	March 19th, 2020 02:32 AM
Modicon M580 PLC- Scadapack 535E RTU Communication Issue	akash11132	LIVE PLC Questions And Answers	1	July 10th, 2018 06:24 AM
Red Lion G310 and Modicon M580 Slow communication	jcp02	LIVE PLC Questions And Answers	0	March 27th, 2018 04:18 AM
Cimplicity MB_TCPIP communication with Schneider M580	Marie1982	LIVE PLC Questions And Answers	2	December 23rd, 2014 10:53 AM



This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
*Try our online PLC Simulator- FREE. Click here now to try it.*

October 7th, 2022, 08:41 AM	#2
byteforlunch Member Join Date: Oct 2022 Location: UK Posts: 7	If the NOC0301 support UCMM communication, you can send read/write commands to it using service 0x4b, class 0x67, inst 0x01 which is the PCCC object. The data format is basically DF1 so the functions are A2 (read) and AA (write) Check out this useful link http://www.iatips.com/pccc_tips.html#pccc

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)