Hi Guys,
Can anyone suggest a way of getting a SLC 5/04 to talk over ethernet? I am installing an Ethernet network for about 10 AB SLCs and Logix 5000 PLCs. I need to add an existing skid onto the network. It has an SLC 5/04 and PV 1000 (2711-T10C8). I thought I could just swap the processor for a 5/05, but the PV can't communicate on serial to Ch 0 of the 5/05. Is there a way of either getting comms between my specific model of PV or of getting the 5/04 onto the ethernet.
Someone has suggested the 1761-NET-EN. Would this work?
Any help much appreciated.
Pablo2000
Can anyone suggest a way of getting a SLC 5/04 to talk over ethernet? I am installing an Ethernet network for about 10 AB SLCs and Logix 5000 PLCs. I need to add an existing skid onto the network. It has an SLC 5/04 and PV 1000 (2711-T10C8). I thought I could just swap the processor for a 5/05, but the PV can't communicate on serial to Ch 0 of the 5/05. Is there a way of either getting comms between my specific model of PV or of getting the 5/04 onto the ethernet.
Someone has suggested the 1761-NET-EN. Would this work?
Any help much appreciated.
Pablo2000