Siemens Profibus DP Slave properties "StartUp When Expected/actual config. differ"?

DenZ_P

Member
D
Join Date
Jun 2016
Location
SomeWhere
Posts
64
Siemens Profibus DP Slave properties "StartUp When Expected/actual config. differ"?

Hello Everyone,

I am configuring IM 153-1 Order number: 6ES7 153-1AA83-0XB0
ET200M family. And as per Operating parameters tab of the Object properties of IM 153-1 there is this checkbox saying "StartUp When Expected/actual config. differ". What does this do? Internet does not really help much or maybe i am inputting a wrong algorithm in search engine.

Please help. thanks!

IM 153-1 Op Parameters.JPG DP Slave.JPG
 

Similar Topics

H
Help: Beckhoff profibus master FC3121 with Siemens CP342-5 slave
Dose anyone have experience with Beckhoff FC3121 profibus master PCIe card connected to Siemens CP342-5 as a profibus slave? The data retrieved...
2
Replies
17
Views
4,803
hosplc
H
N
S7-300 Profibus Master and non-Siemens device as Profibus Slave
Hello Guys, I have s7-315-2 PN/DP with integrated DP. I have no CP module. PLC should be DP master. ON other side there is basler device DECS250...
Replies
6
Views
3,480
boneless
boneless
S
Siemens 315 as Profibus DP slave
Hi, Can you configure a Siemens CPU 315-2 PN/DP as a profibus slave? Is there an advantage to doing this versus using a DP-DP coupler? These...
Replies
3
Views
2,370
Mike_RH
M
C
Siemens S7 Profibus slave error
Hi I have a new installation, CPU is a 315 2DP with 5 IM151s connected via profibus. For ease of use i will call them stations 1 to 5. Station...
Replies
7
Views
4,411
cjd1965
C
HJTRBO
Siemens CPU 555 Profibus slave replacement
Hey again, Whilst my head is back in TI world again, the system that the 555 is on has numerous profibus slaves, so I'm running through a mental...
Replies
0
Views
1,451
HJTRBO
HJTRBO
Back
Top Bottom