I am attempting to setup a Cyclic I/O Ethernet I/P connection between an Automation Direct P3000 and AB Control logix PLC. I need the P3000 to be the originator in this instance and the AB PLC to be the target.
I have a DINT in the AB PLC for testing purposes and configured it as a produced tag. I have done produce/consume before between all AB products without any problems, but I am struggling to find any documentation on the AB side of things as to what the Ethernet I/P connection point is for this produced tag so I can setup the P3000 PLC (which requires this connection point).
Anyone able to point me in the right direction or at some documentation as to where or how I get this connection point information?
Thanks
I have a DINT in the AB PLC for testing purposes and configured it as a produced tag. I have done produce/consume before between all AB products without any problems, but I am struggling to find any documentation on the AB side of things as to what the Ethernet I/P connection point is for this produced tag so I can setup the P3000 PLC (which requires this connection point).
Anyone able to point me in the right direction or at some documentation as to where or how I get this connection point information?
Thanks