steve9199
Member
I have a question about differences in logic solving output instructions when they are placed in series as opposed to parallel. Getting down to the machine language level, what is the real difference in solving:
----------------(COP)---(MOV)----(CPS)-----(OTE)
vs
----------------(COP)
|
|------(MOV)
|
|------(CPS)
|
|------(OTE)
(for example)
These outputs could be OTE, COP, MOV, whatever. What are the true differences (down to the machine level, maybe timing micro or nano seconds???, maybe something else) difference when the outputs are in series verses in parallel?
I am asking because a colleague in China was told by their Rockwell rep that the solving is significantly different
Thanks in advance
----------------(COP)---(MOV)----(CPS)-----(OTE)
vs
----------------(COP)
|
|------(MOV)
|
|------(CPS)
|
|------(OTE)
(for example)
These outputs could be OTE, COP, MOV, whatever. What are the true differences (down to the machine level, maybe timing micro or nano seconds???, maybe something else) difference when the outputs are in series verses in parallel?
I am asking because a colleague in China was told by their Rockwell rep that the solving is significantly different
Thanks in advance