Magelis Vs Digital ProFace

MMAL

Member
M
Join Date
Sep 2005
Location
South Australia
Posts
3
I am thinking of changing from Digital ProFace to Telemecanique Magelis HMI's.

The Magelis HMI is a "badged" ProFace HMI, and I was told that the ProFace software (GP-Pro) can be used with Magelis HMI's with the change of a Dip switch on the screen.

Can anyone tell me if this is so and what switch it is?
 
Digital is owned by Schneider Electric, the same company that owns Telemecanique.

To my knowledge the programming software is not compatible between the two companies (they have different firmware). I do know that there is not a DIP switch on the Magelis.
 

Similar Topics

C
Magelis 5330 backlight burned
Hello all. We have a slight problem. Shcneider Magelis back light burned out and now it is very difficult to operate. There seems no spare parts...
Replies
4
Views
85
Lare
L
B
Communication error between TM221 with magelis HMIGTO
I am having trouble running the application throught my PLC, tm221me32tk with magelis HMIGTO6310 I have prepared the plc programme, also created...
Replies
0
Views
132
BODUSEYTU
B
1
Magelis HMI not working as intended
Good morning friends. . We are having a problem with one of our machines that have two HMI consoles connected to the same network. They have...
Replies
0
Views
1,132
16000lc
1
EICS
Modicon M238 PLC & Magelis HMI - What software Needed ?
I am looking at a bakery oven that has been dismantled and in storage for unknown time, it was manufactured in 2012 so not that old. my gig is to...
Replies
8
Views
3,647
EICS
EICS
L
Schneider Magelis / Vijeo Designer
Any regular users of the magelis range? If so, anyone have a slick way to do a common popup with a rockwell UDT? My current approach is to just...
Replies
3
Views
1,685
Lare
L
Back
Top Bottom