I have a Micrologix 1200 that goes into Major Fault a couple of times a year
The fault is it can communicate with an expansion unit and cant determine which one (there are 2 output modules) When I go online I see the same fault then clear it and all is good for 4-5 months. I have re seated the cables and still get it occasionally. My question is if I set S:1/8 to 1 will cycling power
clear the fault or is there another way to do it without using software.
Thanks
The fault is it can communicate with an expansion unit and cant determine which one (there are 2 output modules) When I go online I see the same fault then clear it and all is good for 4-5 months. I have re seated the cables and still get it occasionally. My question is if I set S:1/8 to 1 will cycling power
clear the fault or is there another way to do it without using software.
Thanks