Steve Etter
Lifetime Supporting Member + Moderator
I have a vendor who has given me over 1100 alarms for each of five (5) sections of his machine. This means I'm capable of receiving any of over 5500 alarms from him. I've already figured out how to capture and display a single alarm and its associated meaning from any of the five sections in the PLC, but now I need to display that captured text on my alarm page.
Using Crimson 3, is there a way to dynamically set the text display of an alarm on the standard alarm screen? The text could read something like "Section 1 - 1100 - Broken Cable Detected" or "Section 1 - 2325 - CPU Overtemperature Fault".
Thanks in advance.
Using Crimson 3, is there a way to dynamically set the text display of an alarm on the standard alarm screen? The text could read something like "Section 1 - 1100 - Broken Cable Detected" or "Section 1 - 2325 - CPU Overtemperature Fault".
Thanks in advance.