You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

Reply
 
Thread Tools Display Modes
Old August 17th, 2022, 08:58 AM   #1
MattMatt9
Member
Canada

MattMatt9 is offline
 
Join Date: Jun 2020
Location: Canada
Posts: 117
C-more HMI EA9 Grey Event Bar on Bottom of HMI

When an alarm (or event) not sure where its pulling from occurs, not only does the alarm list populate but a grey bar along the bottom of the screen also shows up. I dont remember setting it up and was wondering if I can remove this feature as it just takes up space. Thanks.
  Reply With Quote
Old August 17th, 2022, 01:19 PM   #2
joseph_e2
Member
United States

joseph_e2 is offline
 
Join Date: Dec 2010
Location: Harrisonburg, VA
Posts: 299
I'm in the early stages of a C-More EA9 project, so I happened to have the software open and an HMI on my desk.



Go to the Event Manager and look at the events that have a green check in the "Alarm" column. Double-click one and look in the bottom right corner of the Event Edit dialog box. There's a section called "Display" with a check box. The check box controls whether or not the alarm will show up in the banner. Whether it's checked or not, it will appear in the alarm list.
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
Troubleshooting Siemens HMI w/Step 7, & WinCC/Redlion HMI question AutomationTechBrian LIVE PLC Questions And Answers 5 June 22nd, 2014 01:06 PM
FactoryTalk HMI architecture computers and panelview mix V0N_hydro LIVE PLC Questions And Answers 2 January 7th, 2014 11:45 AM
Maple Systems HMI Lag Issue dansanb LIVE PLC Questions And Answers 3 February 5th, 2013 04:12 PM
Motorola Bar code scanner with Siemens PLC and HMI smakdown61 LIVE PLC Questions And Answers 1 December 2nd, 2010 01:32 PM
Mobile HMI w/ bar scanner capability rguimond LIVE PLC Questions And Answers 9 October 7th, 2009 06:48 PM


All times are GMT -4. The time now is 04:28 PM.


.