LordNeil
Member
Hi, I'm pretty new to the RSVIEW32 & have encounted a problem whilst coding visual basic.
The error is:-
Compile Error: Sub or Function not defined
The code is:-
Sub MouldConfirm()
If gTagDb.GetTag("Manual\MouldConfirm") = 1 And gTagDb.GetTag("Robot\In06") = 1 And gTagDb.GetTag("Robot\In00") = 0 And gTagDb.GetTag("Robot\In09") = 1 Then
ShowDisplay ("Robot")
Else: ShowDisplay ("Casting")
End If
End Sub
If you could help, that'd be brill.
Thanks all.
The error is:-
Compile Error: Sub or Function not defined
The code is:-
Sub MouldConfirm()
If gTagDb.GetTag("Manual\MouldConfirm") = 1 And gTagDb.GetTag("Robot\In06") = 1 And gTagDb.GetTag("Robot\In00") = 0 And gTagDb.GetTag("Robot\In09") = 1 Then
ShowDisplay ("Robot")
Else: ShowDisplay ("Casting")
End If
End Sub
If you could help, that'd be brill.
Thanks all.