I transferred to one of our plants that still has several 90-30 plcs after the previous programmer retired. I have been asked to edit a system that is running a MaxOn redundant project while the PLC is still running. I cannot stop it.
I have only a few months of self taught experience.
My question is, can I edit one PLC at a time and not stop the process? can this be done online?
I am not sure what version of software was used to produce this project but I believe it was VersaPro. I also have Proficy 7.0 ME and 9.0 ME.
I have the projects, 2 config and 1 logic.
What would the process be to accomplish this?
Thanks for any help.
Roy
I have only a few months of self taught experience.
My question is, can I edit one PLC at a time and not stop the process? can this be done online?
I am not sure what version of software was used to produce this project but I believe it was VersaPro. I also have Proficy 7.0 ME and 9.0 ME.
I have the projects, 2 config and 1 logic.
What would the process be to accomplish this?
Thanks for any help.
Roy