Al-Naseri
Member
Gents
I'm working on a small project here and the customer requested to control the drive with 4-20mA by using Micro820 Analog output 4-20mA, Module 2080-OF2.
After getting all the logic up and running the only issue I have is I can't get 4-20mA to present on the output? even checked with Ammeter on the output of the module I can't see anything.
Typically after doing scaling the output is REAL data type but the module only accepts UINT, and by using UNIT going to lose some data precision.
Thanks in Advance!
I'm working on a small project here and the customer requested to control the drive with 4-20mA by using Micro820 Analog output 4-20mA, Module 2080-OF2.
After getting all the logic up and running the only issue I have is I can't get 4-20mA to present on the output? even checked with Ammeter on the output of the module I can't see anything.
Typically after doing scaling the output is REAL data type but the module only accepts UINT, and by using UNIT going to lose some data precision.
Thanks in Advance!