Has anyone here used AB point IO over an MDS iNET Ethernet network. I've got the PLC configuration done and online. I've got some issues with the Ethernet radio network because the contractor didn't mount the antenna's high enough (RSSI in the -90 range) so for now I'm waiting on them to fix their problem before I can do my part. I was just wondering if anyone else had done this and if they had are there any gotchas that I need to be aware of?
The system consists of (6) AENBT's with (2)AI, (1)AO, (2) DI, and (1) DO. Each rack has it's own iNET radio. Distance to the access point is 2.8 miles. Flat terrain. Trees to about 25'. All antennae are under 15' AGL right now (hence the problem). The point IO is connected to a CLX L61 processor via ethernet (duh)
The system consists of (6) AENBT's with (2)AI, (1)AO, (2) DI, and (1) DO. Each rack has it's own iNET radio. Distance to the access point is 2.8 miles. Flat terrain. Trees to about 25'. All antennae are under 15' AGL right now (hence the problem). The point IO is connected to a CLX L61 processor via ethernet (duh)