Does anyone know why the program for the orange screened panelview will not load into the color 900? I get a file type unsupported when I tried to load the program. But using same flash card the program would load into another orange screen pnlvw.?
If you are using the ATA card to xfer from the mono PV900 to a color without changing the unit settings in the application then I would say you are seeing a mismatch message. It's been sometime since I have worked with a PV, but I would guess it is something like that.
thanks . Upon looking into it further I found the setting in panelbuilder 32 . I was trying to use a flash card that was for a mono unit.I hope I can change the setting resave to card and then it will work.