Ian762
Member
I have 2 identical machines and need to read bits from one in the other. By identical I mean they are the same physically and in IP structure. They both have the same private IP address and use a Stratix 5700 to NAT out the private IP into a public IP for the plant network:
Machine------Private IP--------Public IP
1-----------10.14.230.1-------10.14.220.153
2-----------10.14.230.1-------10.14.220.161
3-----------10.14.230.1-------10.14.220.169
Stratix------Private IP--------Public IP
1-----------10.14.230.5-------10.14.220.158
2-----------10.14.230.5-------10.14.220.166
3-----------10.14.230.5-------10.14.220.174
What I need to figure out is the comms path for the message instruction, "1, 0, 10.14.220.166, 1, 0" is what I have tried, but I get an error saying the module could not be found. Has anyone dealt with this scenario before, I am not finding anything in the knowledge base dealing with NAT'd out MSG instructions, and my techconnect contract is only good M-F.
Thanks
Ian
Machine------Private IP--------Public IP
1-----------10.14.230.1-------10.14.220.153
2-----------10.14.230.1-------10.14.220.161
3-----------10.14.230.1-------10.14.220.169
Stratix------Private IP--------Public IP
1-----------10.14.230.5-------10.14.220.158
2-----------10.14.230.5-------10.14.220.166
3-----------10.14.230.5-------10.14.220.174
What I need to figure out is the comms path for the message instruction, "1, 0, 10.14.220.166, 1, 0" is what I have tried, but I get an error saying the module could not be found. Has anyone dealt with this scenario before, I am not finding anything in the knowledge base dealing with NAT'd out MSG instructions, and my techconnect contract is only good M-F.
Thanks
Ian