OkiePC
Lifetime Supporting Member
Would it be possible to set up PLC/SLC Mapping and allow the Micrologix 1100 to use a MSG Write instruction?
MSG Instruction Help ControlLogix to Micrologix
- Thread starter nik124
- Start date
Contr_Conn
Member
L8 Redundancy does not allow to do mapping
Last edited:
Similar Topics
Hello All,
This might be a simple question for most of you. I am working on performing some tests on an EIP device through RSLogix 5000.
Based...
Hi,
I'm trying to ensure I have the correct path to allow msg read from 5380 processor via compactlogix. The SI has installed it in a way I'm not...
I'm trying to use a MSG instruction to get data from a SLC into a ControlLogix. I want to read some Boolean tags from the SLC. Is it possible to...
Good morning everyone. I'm relatively new to the Allen-Bradley world. My issue I'm facing is this. I have a remote Refractive Index sensor...
The good news is I became a dad today, i'm posting from the hospital at this moment.
the bad news is i've still not figured out reading my...