Reading LinMot Error in PLC

dtorres279

Member
D
Join Date
Sep 2015
Location
Tampa
Posts
5
Hi Guys

Any of you guys have a idea how to read the on the PLC ( Omron NJ my case ) errors from Linmot , I have a C1250 Drive Ethercat connection???
appreciate any feedback, thanks
 

Similar Topics

A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
142
bkottaras
B
J
Omron CJ2m cpu33 - reading codes
Hi all, i have 8 CJ2m plc units that show different numbers on the plc display and i am stuck on reading the info. my unit has an ip address of...
Replies
3
Views
98
chelton
C
H
Reading from N7:0 in RSLogix 500
Hi Everyone, I am not proficient in RSLogix 500 so I have a question regarding the evaluation of N7:0 data as an input. So as I understand in...
Replies
1
Views
87
parky
P
J
ControlLogix L71 Reading from 5/80E ver D.1
Trying to setup a message read via Ethernet. I have the path setup as 1, 1, 2, 192.168.66.10 I get an error code 1, ext err 315. I am beating...
Replies
9
Views
233
just_lionel
J
H
How to lock a fx3u plc ladder from reading using gx work2
Dear all, I don't know why setup of password became challenging and weird. After setting up the password and try to upload the ladder from the plc...
Replies
3
Views
172
how
H
Back
Top Bottom