fixit Member F Join Date Jul 2002 Location scottsboro AL Posts 0 Feb 9, 2003 #1 iam new to plc's, using A-B 500 program, not sure how to find what type and series of processor i am using, and station address(0-77)? any help would be appreciated
iam new to plc's, using A-B 500 program, not sure how to find what type and series of processor i am using, and station address(0-77)? any help would be appreciated
Mike Williams Member Join Date Jul 2002 Location Alabama Posts 222 Feb 10, 2003 #2 What software are you using? RSlogix 500? Do you have rslinx? If you are setup correctly, the software will find the node of the processor when you are connected. Station address is normally zero. I have only had to change it once due to a 1785 ke card. If you answer the questions about the software you should get tons of help here. Last edited: Feb 10, 2003
What software are you using? RSlogix 500? Do you have rslinx? If you are setup correctly, the software will find the node of the processor when you are connected. Station address is normally zero. I have only had to change it once due to a 1785 ke card. If you answer the questions about the software you should get tons of help here.