Hi,
Recently when making some online changes to a 5-15 (program mode), I started getting this error and can no longer edit anything. The error is:
Rung could not be inserted into online processor!
Insert Instruction Failed: Ext Sts = 0x06
Illegal Address
It doesn't matter what I try to edit or insert... I get the same message. It can be a non-existing bit (b3/118) or an existing one... etc.
I have 4600 words free in a 15k word plc so i don't think memory is the issue.
Any ideas out there?
Recently when making some online changes to a 5-15 (program mode), I started getting this error and can no longer edit anything. The error is:
Rung could not be inserted into online processor!
Insert Instruction Failed: Ext Sts = 0x06
Illegal Address
It doesn't matter what I try to edit or insert... I get the same message. It can be a non-existing bit (b3/118) or an existing one... etc.
I have 4600 words free in a 15k word plc so i don't think memory is the issue.
Any ideas out there?