janner_10
Lifetime Supporting Member
We have a IFM DTE102 RFID Reader. PLC is L82E v32
It presents the results into an array of SINTs, I have to select HEX as the style in the tag editor so it matches with the IFM web browser monitor.
All is good, it works, I can see the results.
I now need to convert my results, say E0 C4 00 63 62 in Hex into a string.
So when the Hex result on SINT[0] for example is 16#E0, I need the string to read E0, this is the bit I am struggling with.
If i can do one, I can do the rest and concat at my leisure, so the results keep the customer paying!
Any ideas?
TIA
It presents the results into an array of SINTs, I have to select HEX as the style in the tag editor so it matches with the IFM web browser monitor.
All is good, it works, I can see the results.
I now need to convert my results, say E0 C4 00 63 62 in Hex into a string.
So when the Hex result on SINT[0] for example is 16#E0, I need the string to read E0, this is the bit I am struggling with.
If i can do one, I can do the rest and concat at my leisure, so the results keep the customer paying!
Any ideas?
TIA