i have messaged 100's of times between processors and had no issues.
I was recently tasked with a project that requires a L32E that does not have ETHERNET/IP modules. I thought because I could see the processor on the network that the messaging would be what I am accustom to. This is a READ of a micrologix N85:20-23 to a 2 DINT message location P2P_FR_CIP
The issue is the message configuration communication path. Im used to:
ENT_1, 2, 10.40.1.147
This script will not work and I cant figure out what the correct script is. I feel hella stupid not knowing this, sorry. I have included picts of mess config of what im used to and the problem one. Any help would be appriciated.
I was recently tasked with a project that requires a L32E that does not have ETHERNET/IP modules. I thought because I could see the processor on the network that the messaging would be what I am accustom to. This is a READ of a micrologix N85:20-23 to a 2 DINT message location P2P_FR_CIP
The issue is the message configuration communication path. Im used to:
ENT_1, 2, 10.40.1.147
This script will not work and I cant figure out what the correct script is. I feel hella stupid not knowing this, sorry. I have included picts of mess config of what im used to and the problem one. Any help would be appriciated.